- Plugin the power, and the machine is energized, the digital tube displays
- Press the "Inten" and "Fre/Hz" button to select the intensity and frequency.we suggest start the operation from the lowest intensity and frequency, then upgrade as needed. Note: 9 level is the lowest frequency for Blue laser pen.
- Coated with anesthesia if you are afraid of pain, there will be a little pain when using the laser pen, feels like an intravenous injection.
- Wear protective glasses Note: Blue laser pen need to wear protective glasses because it keeps flashing
- Put the hole of the pen towards to the spot where you want to operate with, for Blue laser pen, Continuously press the Switch button, then laser light appears, stop pressing the Switch button after 1-2 seconds, then Repeatedly. Note: for Blue laser pen, we suggest Do NOT stay in the same location for more than 2 seconds.
- blue light has an effect on melanin, after the operation, you will see the mole turn more black, then you can stop, after a few days, it will fade and even disappear. for some more, it will Cocoon, do not destroy it, leave it shedding Naturally.
- Cover with repair essence at once after operated, repeat to use repair essence in the following days, Do not expose to the sun, otherwise the skin will be sunburned and turn red.
- Repeat to do this every few days if needed
- High-Tech -Laser Tattoo Removal used unique Honeycomb Focused technology to form a skin effect vacuolization, which can protect skin from damage during treatment.
- Fast Effective - Laser Tattoo Removal makes tattoo & pigment removal treatment process from 5 to 10 times reduced to 2 to 4 times, greatly reduce the treatment and recovery time, with fast and obvious effective.
- Comfortable & Safe - It can remove all kinds of pigment and tattoo effectively and safely because picosecond laser uses precise positioning of the target tissue therapy to reduce damage to the skin to achieve the freckle effect.
- No melanin precipitate - The Laser Tattoo Removal uses ultra-short pulses (one trillionth of a second in length) to hit the melanin with great pressure, the melanin shatters into tiny dust-like particles, because the particles are so small, they are more readily absorbed and eliminated by the body. It will significantly reduce postoperative swelling, melanin precipitate phenomenon.
- The power and effect of blue light picosecond pen are stronger, it need a more professional operation, you have to wear the goggles (goggles are included in the blue one box). You have to press the switch button when using the blue pen, while you don't have to do for the red laser pen.
- The blue laser pen has 9 output mode, different output frequency, and wavelength. The red laser pen has 3 output mode, continuous output, Interval 1-3 seconds output, and Interval 5-7 seconds output.
- Both of it can remove a mole, lentigo, black acne scars, black and blue tattoos, eyebrow tattoo, eyebrow microblading, and any other melanin.
- If you have a black color tattoo, you can choose red picosecond laser pen, if it is a colorful tattoo, you can choose Blue picosecond laser pen. Note: The tattoo color should be deep, slight tattoo color cannot be removed.
- Red light picosecond pen is for personal home use, you can operate it by yourself. Its power and effect are smaller than the blue one.
- Blue light picosecond pen is for beauty salon use or if someone can help you operate it, you CAN NOT operate it yourself because you need to wear the protective eyes glasses, its power and effect are bigger than red light picosecond pen.
After the power of the digital tube, the frequency button will be pressed, and the blue ray will have nine frequency modes 1 to 9 out of the light mode, press the energy increment button to adjust the energy size, finish the setting and output and operate the closing machine, the blue light emits every time.
After the normal display of the digital tube, press the frequency button, the current selection has three frequency modes, 1.2.3 light mode, through the energy increase button to adjust the size, press the switch after the setting, the machine will run out of light and operate out after that, the machine can be turned off.
We suggest using red picosecond pen continuous output mode to remove a tattoo and use blue picosecond pen to remove spot, mole and freckle and etc.
Note & Tips:
- Treatment using this equipment for the first times suggested that with fresh pigskin test equipment, when fully familiar with equipment performance and operation procedures for treatment use again. Please start from the lowest level, then slowly adjust picosecond laser pen to the suitable level. For the blue light picosecond laser pen, the " 9 " level is the weakest, while " 1 " is the strongest. Please start from the weakest level.
- Due to the effect of this equipment can produce high temperature in an instant, when not in use, please properly keep avoid children and do not know the equipment use and to pay, to avoid children and do not know the equipment use and to play, to avoid danger happening.
- The use of this equipment had better not too clean, affected within 30 days (simple) under the care not scrub, not artificially make the hard skin fall off. Do not use irritating skincare products after therapy of picosecond laser pen. Pay attention to sun protection. The freckle treatment area is very sensitive to sunlight.
- When the scab place itch(tender meat phase), don’t by hand grasp, for 20 to 30 days right, the scab will fall off on their own.
- Recovery period is 3 months or so ,it is suggested that during the recovery period is unfavorable eat ginger(affect the skin smoothness beef(produces light red )soy sauce(produces light black)in convalescence, the good things above, the skin can be restored to its original 95% of skin burn pigment directly by machine. Regardless of any color is OK. Then thin scabs skin, the skin pigment will concentration below the scabs, scab off the pigment in the skin such as follows scabs all fallout, absolutely not an infection.
- The device failure occurs, please don’t open trying to repair in order to avoid risk, suggest contacting the original factory maintenance.
- It is strictly prohibited to water or clean this equipment directly, like liquid to avoid entering the device internal cause damage or danger happening.